1. Product : LME regd. Al. Ingots 99.70 % Min.
2. Qty. : 100 MT (in 2 - 50 MT lots)
3. Payment : By 100 % L/C
4. Shipment : 50 MT prompt and bal. 50 MT 15 Days thereafter.
S.Choo
Steelmet Pte. Ltd.
Singapore 1000 Co. 2006
Singapore SME 500 Co.
"Singapore's Trusted Supplier of Aluminium Ingots since 1987"
3 Shenton Way
#08-09 Shenton House
Singapore 068805
Tel: (65) 6224 3377
Fax: (65) 6224 0944
Abonohu te:
Posto komente (Atom)
3 komente:
We required 150 MT + 750MT + 500MT Aluminium Wire Rod of 9.5 mm meant for electric cable from manufacturers only. The Chemical Composition alloy: 1370 EC 99.7% Min. according to DIN 1712 or ASTM standards.
Si: 0.10, Fe:0. 25, Cu:0.02, Mn:0.01, Mg:0.02, Zn:0.04, Ti+V:0.02,B:0.02, Ga:0.03, Cr:0.01
Tensile Strength: Max. 100 MPA
Elongation at break: Min. 20%
Conductivity at 20 degree Centigrade: Min. 35.7 m / ohm mm2
Surface: Clean, Smooth, Free Of Laps, Cracks, Kinks, Twist, Seams,
Damaged Ends, Excessive Oil And Other Imperfection.
Packing: Coils packed ACC to ASTM B 233. Coil weight shall not be less than 2 Tons.
Please quote your best price FOB
Required delivery time within a week OR MAXIMUM 10 DAYS.
Payment: 100% L/C at sight.
If you are not in position to quote it then please forwarded this enquiry to the other manufacturers if you know them.
Looking forward to receipt your quotation at the earliest.
With best Regards,
Deepak Kumar
0091-9810339183
remso2002@hotmail.com
DUKE INTERNATIONAL
D-157, GNEPIP, KASNA, GREATER NOIDA,
DIST: GAUTAM BUDH NAGAR
STATE: UTTAR PRADESH
INDIA.
Requirements of 9.5mm Aluminium wire rod & billets.
Dear Sir,
We required the followings items:-
1. 150 MT + 500MT Aluminium Wire Rod of 9.5 mm meant for electric cable. The Chemical Composition alloy: 1370 EC 99.7% Min. according to DIN 1712 or ASTM standards.
Si: 0.10, Fe:0. 25, Cu:0.02, Mn:0.01, Mg:0.02, Zn:0.04, Ti+V:0.02,
B:0.02, Ga:0.03, Cr:0.01
Tensile Strength: Max. 100 MPA
Elongation at break: Min. 20%
Conductivity at 20 degree Centigrade: Min. 35.7 m / ohm mm2
Surface: Clean, Smooth, Free Of Laps, Cracks, Kinks, Twist, Seams,
Damaged Ends, Excessive Oil And Other Imperfection.
Packing: Coils packed ACC to ASTM B 233. Coil weight shall not be less than 2 Tons.
2. Aluminium Billets (homogenised)
3. Aluminium coils 99.7%.
4. Aluminium ingots.
5. 30 MT of Aluminum Alloy 7075, Billet as per dimensions: 70 mm (W) X 70 mm (H) X 3000 mm (L).
6. 23 Mt of Aluminum Alloy 7075, profile as per Drawing No.
7. 6 MT of Aluminum Alloy 6063, profile as per drawing No.
The Price should be based on Unknown LME cash + Premium FOB
Please quote your best price FOB main seaport.
Required delivery time within a week or maximum 10 days.
Payment: 100% L/C at sight. The Unknown LME cash should be count on the date of opening the L/C.
If you are not in position to quote it then please forwarded this enquiry to the other manufacturers if you know them.
Looking forward to receipt your quotation at the earliest.
With best Regards,
Deepak Kumar
0091-9810339183
remso2002@hotmail.com
Requirements of 9.5mm Aluminium wire rod & billets.
Dear Sir,
We required the followings items:-
1. 150 MT + 500MT Aluminium Wire Rod of 9.5 mm meant for electric cable. The Chemical Composition alloy: 1370 EC 99.7% Min. according to DIN 1712 or ASTM standards.
Si: 0.10, Fe:0. 25, Cu:0.02, Mn:0.01, Mg:0.02, Zn:0.04, Ti+V:0.02,
B:0.02, Ga:0.03, Cr:0.01
Tensile Strength: Max. 100 MPA
Elongation at break: Min. 20%
Conductivity at 20 degree Centigrade: Min. 35.7 m / ohm mm2
Surface: Clean, Smooth, Free Of Laps, Cracks, Kinks, Twist, Seams,
Damaged Ends, Excessive Oil And Other Imperfection.
Packing: Coils packed ACC to ASTM B 233. Coil weight shall not be less than 2 Tons.
2. Aluminium Billets (homogenised)
3. Aluminium coils 99.7%.
4. Aluminium ingots.
5. 30 MT of Aluminum Alloy 7075, Billet as per dimensions: 70 mm (W) X 70 mm (H) X 3000 mm (L).
6. 23 Mt of Aluminum Alloy 7075, profile as per Drawing No.
7. 6 MT of Aluminum Alloy 6063, profile as per drawing No.
The Price should be based on Unknown LME cash + Premium FOB
Please quote your best price FOB main seaport.
Required delivery time within a week or maximum 10 days.
Payment: 100% L/C at sight. The Unknown LME cash should be count on the date of opening the L/C.
If you are not in position to quote it then please forwarded this enquiry to the other manufacturers if you know them.
Looking forward to receipt your quotation at the earliest.
With best Regards,
Deepak Kumar
0091-9810339183
remso2002@hotmail.com
Posto një koment